When the operator starts CNC part processing, he/she should adjust the cutting speed to a very low value, and implement it in a single section. He/she should concentrate when positioning, dropping and dropping the tool quickly. If there is any problem, he/she should put his/her hand on the stop key and immediately stop. He/she should pay attention to the movement direction of the NC blade to ensure safe cutting. Then he/she should gradually increase the cutting speed to a proper value. In addition, he/she should add refrigerant or air conditioner to the NC blade and the workpiece.
At the beginning of processing, it is not allowed to be far away from the operation panel. In case of any abnormality, shut down the machine immediately for inspection. Pull the meter again after roughening to make sure that the workpiece is not loose. If yes, be sure to calibrate and touch again. Continuously improve the processing parameters in the production process to achieve the actual effect of processing.
After the production and processing of the workpiece is completed, it should be measured whether its key specification and mark value are consistent with the requirements of the engineering drawing. If there is any problem, it should be immediately notified to the team leader or the programmer for inspection and handling. After the self inspection, it can be removed and must be sent to the inspector for final inspection.
