Processing needs to be careful. This is not a casual remark. cnc lathe processing in daily operations, some places need special attention, otherwise, a little careless, will be injured. Therefore, no matter which step you are working on, you need to pay special attention to some aspects. See the following for details.
The following points should be noted in the daily operation of Kunshan CNC processing:
1、 When starting up, check whether the spindle is intact, whether the tool holder is firm, and whether the tool is damaged, which is responsible for the product;
2、 When the machine is running, remember not to open the protective plate, because when processing products, in order to prevent sparks, the cutting fluid will be opened. Once the protective plate is opened, it will splash itself, and there may be iron slag flying out;
3、 For the placement of measuring tools, during processing, it is necessary to avoid the collision of measuring tools. Because measuring tools are easy to be damaged due to material reasons, they must be handled with care, not placed randomly, and they should be placed in specific areas according to requirements.
If there are too many, it depends on whether you have taken precautions against them. These are the necessary common sense of CNC lathe processing, and are linked to their own safety, so you must remember these precautions. Every time you process a product, you should clean the iron slag in the lathe in time. Remember to wear gloves when cleaning the iron slag, because the iron slag is very sharp, and a little carelessness may leave you a wound. The above are some basic precautions during processing. You must remember not to miss any detail.
