Automatic part processing will affect the roughness of the part surface. It is mainly caused by the material of tools and workpieces, and the conditions of NC. What if the machined surface of automatic parts is too rough? Let's take a look at the solution.
When processing plastic materials, it will also form strip cutting to form accumulated cutting tumors, and the hardness is also very high. For physical reasons, in the process of workpiece cutting, the rounded corners of the blade and extrusion can deform the metal materials, which will cause serious deterioration of the surface roughness.
Make the workpiece surface have different knife marks in depth, width and width. For example, the rotational speed does not match the cutting speed, the material is too hard, the cutting amount is too much, the workpiece is not compressed, the elasticity of the workpiece is too large, the rubber products such as the tool body is too long, and the tool bar shakes during processing.
Automatic parts are processed through simple mold, soft mold or direct processing. Bench workers' blanking, line drawing, drilling, tapping, etc. It is applied to many industries, and the surface roughness of automatic parts can be solved in time.
